AAW ATH 6-Driver Hybrid Custom In-Ear Monitor

AAW ATH 6-Driver Hybrid Custom In-Ear Monitor, photo 2

AAW ATH 6-Driver Hybrid Custom In-Ear Monitor, photo 3

AAW ATH 6-Driver Hybrid Custom In-Ear Monitor, photo 4

AAW ATH 6-Driver Hybrid Custom In-Ear Monitor

Name: Null Audio
Address: #01-03, LHK2 Building, 76 Playfair Road, Singapore, 367996, SG
Telephone: +65 8731 5476
Price range: $$

¥3,804.00 CNY

AAW’s ATH six-driver hybrid in shells made from your ear impressions, with the same isobaric woofers, NOVA armature and eBassFlow Control, and our Lune cable. Design the shells and faceplates below; ready 6–8 weeks after we receive your impressions.

2 × 8 mm isobaric + NOVA + 3 BA
eBassFlow Control, four settings
Shells from your ear impressions
Live 3D preview
Lune cable
30-day refit

Configure your ATH Custom

Choose the shells, faceplates, artwork, tips and logo below. The price updates as you go.

6–8 weeksFrom receiving your impressions
30-day refitIf the fit isn’t right
1-year warrantyOn the monitors and the cable · then half price for life
AAW, SingaporeImpressions at our studio

Loading cable options…

AAW ATH Custom

ATH, made for your ears.

The same six-driver hybrid and eBassFlow Control as ATH, in shells cast from your ear impressions: a deeper seal, more isolation and a fit you can wear through a whole set.

You design the shells and faceplates in the configurator, and it comes with our Lune cable.

6 Drivers: 2 × 8 mm isobaric graphene + NOVA + 3 balanced armature
4 Sound signatures on two switches
6–8 weeks From receiving your impressions
30 days Free refit if the fit isn’t right

At a glance

The build behind the listen

Custom shells from your ear impressions · Lune cable

2 × 8 mmIsobaric graphene woofers
3 ×Mid-range balanced armatures
NOVAOpen-vented armature
4-stepeBassFlow Control

Key features

Dual 8 mm graphene isobaric woofer
NOVA open-vented armature at the nozzle
Three mid-range balanced armatures
FIBAE flat impedance and phase
eBassFlow Control: four sound signatures

Sensitivity: 105 dB SPL @ 1 kHz
Impedance: 8 Ω @ 1 kHz
Total harmonic distortion: ≤ 0.5% @ 1 mW, 1 kHz
Frequency range: 10 Hz – 40 kHz
Drivers: 6 per side
Socket: Recessed or flat 2-pin

Woofer

Two Diaphragms, One Low End

Two 8 mm graphene woofers work as an isobaric pair, each with its own diaphragm and a high-strength neodymium magnet. Together they lower distortion in the low range and raise output beyond what a typical dynamic woofer gives.

Acoustic filtering keeps the pair to its own band, with minimal overlap with the armatures, so the sub-bass hits hard and stays natural without overpowering the rest of the range.

Armatures

Open at the Nozzle, Flat in Impedance

AAW’s NOVA open-vented armature sits deep in the 3D-printed nozzle, close to your eardrum, which removes the pressure loss and resonance of a conventional tubed armature. It carries the detail in the upper mids and treble, while three mid-range armatures give the voice its smoothness and precision.

FIBAE, licensed to AAW by Custom Art of Poland, turns the armatures’ character from inductive to resistive, for flat impedance and corrected phase. ATH sounds as it should from any player, whatever its output impedance.

Tuning

Four Signatures, Two Switches

eBassFlow Control gives ATH four sound signatures, set on two small switches with the adjuster in the box: Reference, Bass, Live and Classic.

The settings differ in more than voicing. Each also changes the impedance and the sound pressure level, so ATH can be matched to different sources and different uses.

Design

Made Your Way

Choose the shell and faceplate colour for each side, wood, glitter, foil or Atelier faceplates or your own artwork, the nozzle tips, the AAW logo finish and engraving, and watch it come together in the configurator’s live 3D preview.

Choose a recessed or flat 2-pin socket. The photos show finishes from AAW custom IEMs.

In the box

Lune Cable Included

ATH Custom comes with our Lune cable with 2-pin connectors. Choose the player plug in the configurator: 2.5 mm or 4.4 mm balanced, or 3.5 mm single-ended.

You can also upgrade to a higher-tier Null Audio cable when you order.

Compare

ATH Custom vs ATH universal

Same drivers, eBassFlow Control and Lune cable. The custom is made from your ear impressions, in shells you design; the universal is in stock, in a 3D-printed shell that fits with ear tips.

See ATH universal

ATH Custom vs ATH universal
Feature	Custom	Universal
Fit	Shells made from your ear impressions or 3D scan	Universal shell with ear tips
Look	Your choice of shells, faceplates, artwork and logo	Electroless Immersion Gold faceplates
Drivers	2 × 8 mm isobaric graphene + NOVA + 3 BA	Same
Tuning	eBassFlow Control, four settings	Same
Cable	Null Audio Lune; plug chosen in the configurator	Null Audio Lune; 2.5, 3.5 or 4.4 mm
Socket	Recessed or flat 2-pin	0.78 mm 2-pin
Ready in	6–8 weeks from receiving your impressions	In stock, ships from Singapore
Returns	No change-of-mind returns; 30-day free refit	14 days, unused

In the box

Ready to listen

AAW ATH Custom in-ear monitors Made from your ear impressions
Null Audio Lune cable 1.2 m, 2-pin
Player plug 2.5, 3.5 or 4.4 mm, chosen in the configurator
AAW carrying case
eBassFlow Control adjuster
Cleaning cloth and brush For the nozzles and shells

Ordering and care

Process

How It Works

Configure your ATH Custom and place the order.
Get ear impressions: at our studio in Singapore, or post physical impressions or email a 3D scan with your order number.
AAW builds your ATH Custom in 6–8 weeks from the day we receive your impressions.
We ship it to you, or you collect it at our studio.

Fit

Ear Impressions

In Singapore, we take ear impressions at our studio for SGD 50, by appointment through WhatsApp +65 8731 5476 or sales@null-audio.com.

Elsewhere, post physical impressions from a local audiologist to Null Audio, #01-03, LHK2 Building, 76 Playfair Road, Singapore 367996, or email a 3D scan (STL) of your impressions or ear canals to support@null-audio.com. How to order custom IEMs explains what a good impression or scan needs.

Care

Caring for Custom IEMs

Clear the nozzles with the brush after use and wipe the shells with the dry cloth. Keep them in the case, away from heat and moisture, and avoid alcohol-based cleaners on the faceplates.

If the fit isn’t right within 30 days of delivery, we refit them for free (overseas return shipping is charged separately).

Specifications

Technical details

Monitor

Type: Custom-fit hybrid in-ear monitor
Drivers: 2 × 8 mm graphene dynamic in an isobaric pair, NOVA open-vented armature, 3 × mid-range balanced armature
Impedance technology: FIBAE (flat impedance balanced armature), licensed from Custom Art
Tuning: eBassFlow Control, 2 switches: Reference, Bass, Live, Classic
Sensitivity: 105 dB SPL @ 1 kHz
Impedance: 8 Ω @ 1 kHz
THD: ≤ 0.5% @ 1 mW, 1 kHz
Frequency range: 10 Hz – 40 kHz
Shells: Custom-fit, made from your ear impressions or 3D scan; shells, faceplates, artwork and logo of your choice
Socket: Recessed or flat 2-pin

Cable

Cable: Null Audio Lune, 1.2 m
Player plug: 2.5 mm or 4.4 mm balanced, or 3.5 mm single-ended; chosen in the configurator

Ear impressions

In Singapore: At our studio, SGD 50, by appointment
Elsewhere: Physical impressions by post, or a 3D scan (one STL file per ear) by email

Service

Lead time: 6–8 weeks from receiving your ear impressions
Refit: Free within 30 days of delivery; overseas return shipping charged separately
Warranty: 1 year, on the monitors and the cable
Returns: Custom IEMs can’t be returned for a change of mind; defects are covered by the warranty

5 stars: 3 (100%)
4 stars: 0 (0%)
3 stars: 0 (0%)
2 stars: 0 (0%)
1 star: 0 (0%)

Great Ear Plugs

I really like these. They fit really well and look great, I went with the sort of rock/gemstone look. The sound is good and I can wear them for a while. They sound pretty similar to the UE5 pros but warmer and with more depth, and they are less intense than the JH11s I have (which are great but kind of intense for want of a better work).

My only slight problem is that the nozzle outlets are small and getting the wax out is really tricky without poking it in further.

AAW ATH custom iem

Great soundstage. Good fit. Loving them!

Sounds great, but needed refit

Sounds great as expected.
However, I had a fitting issue on my right earphone.
Requested for refit, and still waiting to be returned.

Questions

Good to know

How is ATH Custom different from ATH universal?

The fit and the look. Drivers, eBassFlow Control and the Lune cable are the same. The custom is made from your ear impressions, so it seals deeper and isolates more, and you design its shells and faceplates. The universal has a 3D-printed shell, fits with ear tips and is in stock.

How do I order?

Choose your options in the configurator on this page, then get ear impressions made. In Singapore we take impressions at our Playfair Road studio for SGD 50, by appointment. From overseas, post physical impressions or send us 3D scans (STL files) of your ear impressions or ear canals.

How to order custom IEMs

What is the driver configuration?

Six drivers: two 8 mm graphene woofers in an isobaric pair for the bass, three mid-range balanced armatures for the voice, and a NOVA open-vented armature in the nozzle for the upper mids and treble. FIBAE gives the system flat impedance and corrected phase.

What does eBassFlow Control do?

It gives ATH four sound signatures, set on two small switches with the adjuster in the box: Reference, Bass, Live and Classic. Each setting also changes the impedance and the sound pressure level, so ATH can be matched to different sources and uses.

What is FIBAE?

Flat Impedance Balanced Armature Earphone technology, developed by Custom Art of Poland and licensed to AAW. It makes the armatures behave as a resistive rather than inductive load, so the impedance and phase stay flat and the sound no longer depends on the output impedance of your player.

Which cable does it come with?

Our Lune cable, with the player plug you choose in the configurator. You can upgrade to a higher-tier Null Audio cable when you order; see the AAW cable guide.

How long does it take?

6–8 weeks from the day we receive your ear impressions or scan, plus shipping.

What if the fit isn’t right?

We refit it for free within 30 days of delivery. For overseas orders, return shipping is charged separately.

What warranty and returns apply?

One year against defects in materials and workmanship, on the monitors and the cable. Custom IEMs are made to your ears, so they can’t be returned for a change of mind; quality problems are covered by the warranty.

Read the full return policy

Next in the chain

Follow the signal further.

Routes picked for this page, all from the same bench in Singapore.